curved box girder bridge中文是什么意思

• 箱形梁曲线桥

• "curve"中文翻译    n. 1.曲线；弯曲；弯曲物。 2.曲线规 (＝Fren ...
• "box"中文翻译    n. 【植物；植物学】黄杨；黄杨木，(＝boxwood) ...
• "girder"中文翻译    n. 【建筑】纵梁，大梁，撑柱，撑杆，大型工字梁。 a ...
• "bridge"中文翻译    n. 【牌戏】桥牌战，打桥牌。 auction brid ...
• "curved grillage girder bridge" 中文翻译 :    曲线格子梁桥
• "box girder bridge" 中文翻译 :    箱形梁桥
• "box girder cantilever bridge" 中文翻译 :    箱形梁式悬臂桥
• "trussed box girder bridge" 中文翻译 :    箱形桁架桥
• "trussed-box-girder bridge" 中文翻译 :    箱形桁架桥
• "steel box girder of the main bridge" 中文翻译 :    主桥钢箱梁
• "bridge girder" 中文翻译 :    桥的大梁; 桥梁; 桥主梁；桥大梁
• "girder bridge" 中文翻译 :    板梁桥; 梁式桥; 桁梁桥
• "curved bridge" 中文翻译 :    曲桥; 曲线桥; 弯桥
• "box girder" 中文翻译 :    船】箱形桁材; 盒形梁; 匣形梁, 函梁; 箱梁; 箱形大梁；空心梁; 箱形截面梁; 箱形梁；箱形大梁; 箱形主梁；箱形大梁; 箱形桁
• "beam bridge, girder bridge" 中文翻译 :    梁桥
• "bridge girder erection equipment" 中文翻译 :    架桥机
• "bridge girder erection machine" 中文翻译 :    架桥机
• "bridge girder factory" 中文翻译 :    桥梁工厂
• "bridge plate girder" 中文翻译 :    桥的板梁
• "bridge seating girder" 中文翻译 :    桥座大梁
• "cantilever girder bridge" 中文翻译 :    悬臂梁桥
• "cantilever lattice girder bridge" 中文翻译 :    悬臂式桁桥
• "concrete girder bridge" 中文翻译 :    混凝土梁式桥
• "continuous girder bridge" 中文翻译 :    连续梁桥
• "deck-girder bridge" 中文翻译 :    连续大梁式上承桥

• Study of the web side crack of prestressed curved box girder bridge
  预应力曲线箱梁桥腹板侧向崩裂研究
• This paper analyzes skew support continuous curved t girder bridge and skew support continuous curved box girder bridge that largely applied in practical engineers , adopting statically indeterminate simple - supported curved beam as basic structure
  论文以超静定简支曲线梁作为基本体系，对在实际工程中广泛应用的斜支承连续曲线t梁桥和斜支承连续曲线箱梁桥进行分析。
• When analyzing skew support continuous curved box girder bridge , curved grid girder analyzing method considering warping effect is applied . matrix displacement method is applied in analyzing skew support continuous curved thin - walled box girder bridge with restrained bearing . in order to convert original rigidity equations to structural rigidi ty equations that can be solved , bearing nodal displacement matrix can be introduced , then unknown quantities at the edge of beams can be consistent with the restrained directions of skew bearings , unit rigidity matrix and unit nodal forces can be gained . structural rigidity matrix can be composed according to matrix displacement method , so nodal displacements and inner forces on the end of the rod that are unknown can be gained calculating equations of inner forces on any cross - section can be solved
  分析斜支承连续曲线箱梁桥时，采用考虑翘曲作用的曲线格子梁分析方法，应用矩阵位移法对具有约束支承形式的斜支承连续曲线薄壁箱梁桥进行分析，考虑到支座的约束条件并不与梁端弯曲角位移和扭转角位移的方向一致，引入支座节点坐标矩阵，使得梁端的位移未知量与斜支座约束方向一致，来计算单元刚度矩阵和单元节点力，然后按照矩阵位移法组集总刚并建立结构刚度方程，根据结构刚度方程即可求解未知的节点位移及杆端力，推导出任意截面处的内力计算公式。

• curved box girder bridge 意味
• curved box girder bridgeとは意味曲線箱桁｛きょくせん はこげた｝